Get matchedWhy your heat pump runs on emergency heat in Arizona
Describe your heat pump job, and a local pro who handles it gets in touch.
Your thermostat shows a flame icon or the words "emergency heat" and the heat pump isn't doing what it normally does. In Arizona, where the house heats on electricity and a heat pump is doing that job, this almost always means the system isn't finishing the cycle it's supposed to run on its own. Something is stopping the outdoor unit from doing its share of the work, so the system falls back to its backup heat strip to keep the house warm.
That fallback can run for a while without anyone noticing, since the house still gets warm. But backup heat and normal heat pump operation aren't the same thing, and a system stuck on backup isn't fixing itself. Something tripped it into that mode, and it stays there until a contractor finds out what.
Finding out what takes someone who can actually get into the unit, check the outdoor coil, test the reversing valve, look at the defrost control and the wiring that ties it all together. That's not a weekend project, and it's not something to diagnose by reading about heat pumps online. It takes a license, a gauge set, and a reason to trust what they tell you about your specific system.
That's the part this page helps with. Instead of searching for HVAC contractors near you, calling a few, describing the emergency heat light to each one, and waiting on quotes to compare, you answer a few questions about your system and your situation once. A contractor who handles heat pump repair in your area gets matched to what you described and reaches out to you directly.
You still need someone to look at the unit and tell you what's wrong with it. This just gets you to that person without the legwork of finding them yourself.
Why is my heat pump stuck on emergency heat?
You went to check the thermostat and it's set to emergency heat, or it switched over on its own. You didn't touch that setting, and now you're wondering if the heat pump broke or if something else is going on. It's running, the house is getting warm, but you know this isn't how it's supposed to work day to day.
The heat pump can't complete its heating cycle, so the backup electric heat is doing the work instead
Emergency heat means the heat pump itself has stepped out of the loop and the house is running on backup electric heat strips alone. That switch happens because something in the heat pump side, the outdoor unit, the compressor, a sensor, or the defrost control, isn't letting the system finish a normal heating cycle. In Arizona winters aren't brutal, so this isn't about the cold overwhelming the unit the way it might elsewhere. It's a sign the heat pump has a fault a contractor needs to look at. The backup strips will keep the house warm in the meantime, but they use a lot more electricity to do it, and that shows up on the next bill.

Summer air here sits at a dew point of 47°F on average across June, July and August, which is dry by any measure. That dryness is good for a heat pump. Dry air gives up heat more easily, so the outdoor coil doesn't have to work as hard to pull warmth out of it come winter, and the system is less likely to lean on backup heat just to keep up. If your heat pump is sitting on emergency heat anyway, the air outside isn't why. That points to something with the equipment itself, which is worth having looked at rather than guessed at. Getting matched with a contractor who knows this equipment means you skip the part where you call around, explain the thermostat and the flame icon over and over, and sort through quotes yourself.
NASA POWER T2MDEW county cells weighted by homes
A local pro for your heat pump repair
A heat pump that's stuck on emergency heat is running on backup electric strips instead of the compressor and outdoor coil, and that backup isn't built to carry the house on its own for long. It costs more to run and it tells you the heat pump side has given up on the job somewhere, whether that's a failed sensor, a stuck relay, a refrigerant problem, or a compressor that won't start. None of those get better by leaving the thermostat where it is. Sorting out which one it is means getting a contractor who knows heat pumps, not just furnaces, since the diagnosis and the fix aren't the same as either one alone. Instead of searching around Arizona for someone who works on heat pumps, calling a handful of companies, walking through the same symptoms each time, and weighing quotes against each other, you can hand this off once. One contractor who covers this gets your request, and you're not stuck on backup heat while you sort it out.

It's past eleven and you're still awake, not from heat this time but from the cold. January nights here can drop hard once the sun's gone, and tonight the heat pump has been blowing air that never quite feels warm enough. You've pulled a second blanket over the bed. The vent above the dresser is running loud, the way it does on emergency heat, and you keep checking the thermostat number against how the room actually feels. The dog's curled up tighter than usual at the foot of the bed. You're doing the math on how many hours until the electric bill shows up, and whether it's worth getting up to check the breaker panel one more time before trying to sleep.

Emergency heat means the heat pump needs a look
A heat pump stuck on emergency heat is telling you something specific. The compressor or outdoor coil isn't carrying the heat load anymore, so the system fell back to electric strips to keep the house warm. That's not a setting to undo. It's a sign the heat pump side needs a diagnosis, and running on strips for long stretches costs more than the house is used to.
You don't have to start with a search for who handles heat pumps in your part of Arizona, then call a few, explain the thermostat and the flame icon again each time, and sort through quotes before anyone's even looked at the unit. That part ends here. Answer a few questions about what the thermostat is showing and a contractor who works on heat pumps will reach out directly to look at the compressor and coil and tell you what's going on.


Get the right pro for your heat pump
Describe your heat pump job once, to one pro.